Faqs / Q: Can I treat my irrigation water?

December 19, 2012 by ·

A: Generally irrigation water is difficult to treat due to the large volumes needed. Selecting the appropriate well is the best way to keep irrigation water from staining.

Posted in: FAQ for Water Treatment

Partridge Well Drilling Company, Inc.

3 months ago

It's going to be cold here in NE Florida. Pipes and pumps can be damaged and/or inoperable when they are frozen. Here are some tips to help keep water pumps and pipes from freezing:1) Keep water moving. Let water trickle at outside hose bibs. Try to use outside bibs as this water does not run in the septic system. This will help by bringing warm water from the well through the system.2) If you happen to be awake during the night or early morning, run enough water inside to cause the pump to come on which will bring warm water from the well through the system.3) Cover pumps and exposed pipes. Try to drape something over equipment. Pump motor must have air flow. Do not wrap anything tightly around pump motor.4) Add heat source. The first thing that normally freezes is the pressure switch and pressure switch tubing. You MUST be very careful to not let a heat source contact anything that could catch on fire or melt.5)Turn on pool equipment so it will run until temperature rises above freezing.It can be challenging to keep pumps and pipes from freezing. It may take a combination of things to protect the equipment. ... See MoreSee Less

Photo

View on Facebook

Partridge Well Drilling Company, Inc.

7 months ago

Photo

View on Facebook

Partridge Well Drilling Company, Inc.

10 months ago

We are hiring! We have several positions available for both our well and pump departments. Please come to our office to fill out an application. You must have a clean driving record. ... See MoreSee Less

Photo

View on Facebook

Partridge Well Drilling Company, Inc.

1 years ago

Photo

View on Facebook

Partridge Well Drilling Company, Inc.

2 years ago

It's going to be cold here in NE Florida. Here are some tips to help keep pumps and pipes from freezing:1) Keep water moving. Let water trickle at outside hose bibs. Try to use outside bibs as this water does not run in the septic system. This will help by bringing warm water from the well through the system.2) If you happen to be awake during the night or early morning, run enough water inside to cause the pump to come on which will bring warm water from the well through the system.3) Cover pumps and exposed pipes. Try to drape something over equipment. Pump motor must have air flow. Do not wrap anything tightly around pump motor.4) Add heat source. The first thing that normally freezes is the pressure switch and pressure switch tubing. MUST be very careful to not let heat source come in contact with anything that could catch on fire or melt.5) If you happen to be awake during the night or early morning, run enough water inside to cause the pump to come on which will bring warm water from the well through the system.6)Turn on pool equipment so it will run until temperature rises above freezing. It can be challenging to keep pumps and pipes from freezing. It may take a combination of things to protect the equipment. ... See MoreSee Less

View on Facebook

904-269-1333

Faqs / Q: Can I treat my irrigation water?

Recent Blog Posts

Partridge Well Drilling Co.